PDP Afterglow Fener Speaker Replacement
ID: 52233
Description: First we are going to take apart the headset to...
Steps:
- Gently pull off your left and right ear pad. For further instructions on how to carefully do this please go to this guide here.
- For each of the red circled screws, take your J000 screwdriver and unscrew the screws.
- This is a picture of what your headset looks like now that you have done the first two steps.
- Remove the wire connected in the red box by gently pulling it off.
- Take your soldering iron and unsolder the wire from the speaker.
- The red square is the left tip and the orange square is the right tip.
- Before wiring your new speaker in, clean the left and right tips with your soldering iron.
