HP Pavillion dm4t-2100 Memory Card Replacement

ID: 56192

Description: To detach the memory you will need a Phillips...

Steps:

1. Shut down the computer.
2. Shutting down the computer by holding power button can cause damage to computer.
3. Turn computer upside down so the base is facing upward.

4. Slide latch next to battery icon until battery pops up.
5. Pull the battery away from the computer until completely detached.

6. Loosen two 5mm Phillips #1 screws securing plastic cover, until cover is detachable.
7. Slide cover toward empty battery area and remove it.

8. Lift black cover overlaying memory chip.
9. Spread the tabs on each side of the memory slot to release the module.
10. Remove memory by pulling the memory out at an angle, until completely detached.