Amazon Fire HD 10 Rear Facing Camera Replacement

ID: 56202

Description: You will need to use the screen replacement...

Steps:

1. Avoid prying near bottom right hand side due to LCD Connector
2. Use a plastic opening tool to pry the screen up in the right hand corner.

3. Do not completely remove the screen yet as there is a ZIF connector connected.
4. Lift the screen and digitizer from the case.
5. You may need to use some force due to the glue.

6. Be mindful of the ZIF connector.
7. Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

8. Remove the screen and digitizer from the case completely.

9. Remove the single T5 Torx screw at the base of the camera.
10. Once removed, place the screw aside in a safe location.

11. Lift the camera from the case using the plastic opening tool.
12. The camera is still connected to the motherboard via the ZIF connector.

13. Gently grab the camera and pull to remove.
14. The camera is now free from the motherboard.