Netgear G54 Wireless Router Teardown

ID: 56217

Description: A teardown the NetGEAR 54 Wireless Router

Steps:

1. Flip the Net Gear wireless Router over remove four rubber tabs .
2. Place them to the side

3. There four screws that need to be removed.

4. Use a Phillips #00 screwdriver to remove the four screws.
5. Place them aside

6. Removing the bottom top facing up .
7. Put it to the side.

8. Use a spudger on the edge of the clear hard plastic around the outer casing.
9. Use a spudger on the edge to push up the plastic casing.
10. Once the clear plastic casing is removed, place it to the side.

11. Remove the motherboard with bottom case. Then you are done.

12. After remove the motherboard . The top cases of the Router.