Magellan RoadMate 2120T-LM Speaker Replacement

ID: 56378

Description: This guide walks through the process of...

Steps:

1. Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.

2. Pry up on back panel with black spudger

3. Disconnect battery and speaker cables from the motherboard at indicated places.

4. Use a spudger to remove the battery from the back panel.
5. If at all possible, please try to use a regular nylon spudger before resorting to a metal spudger. Metal spudgers are much sharper, and have the potential to accidentally pierce the battery.
6. There is a strong adhesive holding the battery to the back panel.
7. This step is not a prerequisite for replacement of other components.

8. Locate the internal speaker just above the battery
9. Remove the two 3 mm Phillips #1 screws.