Microsoft Lumia 435 Touch screen with Frame Replacement

ID: 56380

Description:

Steps:

1. Switch off the phone.
2. Remove the battery and any inserted SIM and memory cards.
3. Use a screwdriver Torx T6 and remove the 4x black screws.

4. There are several plastic locking clips hold the back cover to the frame.
5. Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

6. Unhook:
7. the touch screen flex cable
8. the LCD Display flex cable
9. Use a plastic tool lift up and remove the Logic board.

10. This is the logic board / main board - a front and rear view.

11. The Display metal shield is locked to the frame by 4x locking clips.
12. Use a tool with a sharp tip and careful unlock them and remove the shield.

13. The display is stuck tovthe touch screen glass with a double-sided adhesive tape.
14. Use a hair dryer or hot air gun and worm the glass to make adhesive soften.
15. Distort the frame a little and use a thin plastic tool to separate the display from the frame.

16. The display is very fragile, do the separation very carefully.