Ninja Kitchen System Pulse Motor Replacement

ID: 56404

Description: You will learn how to remove the motor from the...

Steps:

1. Take out the three 15 mm Phillips #1 screws.
2. Remove the 15mm T10 screw.
3. Place the 4 screws on the magnetic mat.

4. Remove the gray base by lifting upwards and placing to the side.

5. Remove the three 15 mm Phillips #1 screws.
6. Place screws on magnetic mat.

7. Remove the motor by gently lifting up. Be careful with the cords, as they may be tangled.
8. This is the entire motor for the Ninja. If you have access to a spare motor, simply swap out the motors.