BLACK and DECKER BDERO100 Hook and Loop System Replacement

ID: 56494

Description: This guide provides information on how to...

Steps:

1. Remove the sanding paper from the velcro.

2. Select the JIS - J1 bit or the most appropriate bit to match the screws for your model.

3. Use the Bit Driver to take off the four 12.5 mm Phillips screws at the base of the hook-and-loop system.
4. Be careful not to lose the lock washers (black rings).

5. Once all screws and washers have been removed, hold the hook and loop system and separate it from the device.