Afterglow Prismatic Wired Controller for Xbox One Teardown

ID: 56499

Description: This guide goes through each step required to...

Steps:

1. Use a Phillips #0 Screwdriver to remove the seven Phillips head screws.
2. Separate two halves of clear casing by holding one side and lifting the other.

3. Use a Phillips #0 Screwdriver to remove the seven Phillips head screws.
4. Lift motors off of controller.
5. Lift circuit board off of controller.

6. Use a Phillips #0 Screwdriver to remove the three screws.
7. Remove triggers by lifting them off the circuit board.
8. Lift the circuit board off of the controller.

9. Remove the power and mute button by pulling them out. They will be loose at this point and may fall out by themselves.