ProScan PLT7223G Motherboard Replacement

ID: 56501

Description: If your device isn't working and other...

Steps:

1. Remove both 4 mm screws from the top of the tablet using a PH00 screw driver.

2. Use the blue opening tool to pry the tablet open.

3. Remove all yellow tape from the motherboard.

4. With the soldering tool remove the speaker wires, battery wires and gray wire that are connected to the motherboard.
5. Pay close attention to where each wire goes, so that you reconnect them in the correct order.

6. Lift all three ZIF connectors to disconnect the ribbon wire.

7. Use a PH00 screw driver to remove the three 4 mm screws holding the motherboard down.

8. Lift the motherboard off the device.