Sony Cyber-shot DSC-W800 LCD Screen Replacement

ID: 56526

Description: Some things to consider before you work on the ...

Steps:

1. Remove the five 4.0 mm Phillips #000 screws on the back panel.

2. Using the Spudger, remove the back panel from the device.
3. The loose piece circled in the picture will most likely fall off the camera housing.

4. Remove the two 2.15mm Phillips #000 screws from the circuit board.
5. Gently pull on the ribbon wire from ZIF connector with the tweezers to remove the button board.
6. Ribbon wires can easily be damaged.

7. Remove the four 3.75 mm Phillips #000 screws from the LCD back panel.

8. Lift the back panel and separate the LCD Screen by prying it up.
9. Remove the back panel.

10. Gently pull on the ribbon wire disconnecting from the ZIF connector (connecting the LCD screen to the motherboard) with the tweezers.
11. Ribbon wires can be easily damaged.