How to Open Logitech Harmony 1100

ID: 61441

Description:

Steps:

1. Remove the battery cover by pushing down on the circled areas and pushing outward.
2. Remove the battery by lifting up the battery on the corner exposed by the indent in the case

3. Use a J0 screwdriver head
4. Remove the 3 screws from battery compartment

5. Open the connector port on the side.
6. Remove screw with a PH00 screwdriver head.

7. Use plastic opening tool to pry at the open slits on the side.
8. One or two silver foam cubes may pop out of the device. These belong in the slots shown in the third picture. They do not need to go back until reassembly.
9. The plastic connector door will fall off. It will need to be put back upon reassembly.