Verizon Ellipsis Jetpack MHS800L Battery Replacement

ID: 61571

Description: What you can expect from this guide is a step...

Steps:

  1. Remove the SIM card, that is located on top of the Jetpack.
  2. Step image Step image Step image
  3. With the device on its back and the label facing you, remove the rubber screw cover on the top left corner of the device.
  4. Under the rubber circle, remove the 1.25 mm screw using a Phillips #00 Screwdriver.
  5. You may need to peel back a piece of double sided tape covering the screw hole.
  6. Step image Step image Step image
  7. Remove three 1.25 mm screws.
  8. Step image
  9. Use a plastic pick at the seams and pry open the case.
  10. Step image
  11. Once the cover is off, this is what your device will look like.
  12. Step image
  13. Once you have the case off of your device gently pull your battery away from the device.
  14. Do not attempt to completely remove the battery, as it is still attached to the motherboard by wires.
  15. Step image Step image
  16. With a pair of Tweezers remove the yellow tape covering the battery wires.
  17. Step image Step image
  18. After removing the tape you may use the Tweezers to remove the wiring harness from the circuit board.
  19. Do not squeeze the wires to hard you may damage them and cause a short.
  20. Step image
  21. You may now replace the battery in your Verizon Ellipsis Jetpack MHS800L.
  22. Step image
Back