DYMO LabelManager 160 Keyboard Replacement

ID: 61600

Description: If the DYMO LabelManager 160's keys are...

Steps:

  1. Place the device face-down to access the battery compartment.
    2. Step image
  2. Remove the compartment cover to reveal the batteries. Remove the 6 old batteries.
    3. Step image
  3. To open the cartridge compartment, simply lift on the front of the device.
    4. Step image
  4. Using a Phillips #0 screwdriver, remove the four 1.3mm screws from the cartridge compartment and two 1.2mm screws from the battery compartment.
    5. Step image Step image
  5. Using a spudger or other tool, lift and remove the front of the device. This should be done all around the device to ensure the two parts split correctly.
    6. Step image
  6. Gently remove the rubber keyboard from the device.
    7. Step image Step image Step image
Back