Lightahead DV328 Strap Replacement

ID: 61686

Description: This guide demonstrates how to replace the stra...

Steps:

1. To access the area underneath the camcorder, remove the two pieces covering the screws with a plastic spudger.
2. Remove the two Phillips #2 screws.
3. Gently pull up the cover.

4. Pull off the lens.
5. Be careful not to pull the cover too far up, otherwise it will snap in half.
6. Inside the device the motherboard and a screw will be visible.
7. Remove the pictured Philips #0 screw to release the strap.