Canon AE-1 Light Filter Foam Replacement

ID: 6859

Description: We are removing the old light filter foam and...

Steps:

1. Open the film compartment by pulling on the release pin.
2. Use a 3mm slot screw driver to scrape old light filter foam cleanly off.
3. Then use Isopropyl Alcohol to assist in removing the old light filter foam.

4. Placing light filter foam improperly could result in light exposure on film.
5. Cut the new light filter foam to size so it can fit in the slot.
6. Place the sticky side of the new strip of light filter foam over old foams location.