Apple AirPort Extreme Model A1034 Antenna Replacement

ID: 6917

Description: Replace a faulty antenna on the AirPort Extreme...

Steps:

  1. Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.
    2. Step image
  2. Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.
    3. Step image
  3. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.
    4. Step image Step image
  4. Unplug the black connector on the top of the metal casing by gently pulling horizontally.
    5. Step image
  5. Remove the two 4mm phillips screws to remove antenna.
    6. Step image
  6. The circuit board connected to the antenna is attached to the metal case with foam adhesive.
  7. Gently peel or cut the foam holding the circuit board with a knife and remove it from the AirPort.
    8. Step image
Back