Motorola Razr V3c Face-Screen Replacement

ID: 6966

Description: rough draft

Steps:

1. Clear a table or desk to use as a workspace. You will need a container to place small screws as they will be used in reassembly.

2. Open the phone's face.

3. Unscrew the four screws located around the face plate using a 1.5mm Hex tool.

4. After removing the screws, use a flat surfaced tool to take the face-screen off.

5. Use this step as a checkpoint. Once the face-screen cover is off, the workspace should resemble this step’s picture.

6. Carefully remove the face-screen using your fingers.

7. You may now carefully install a functioning face-screen.

8. After securing the face-screen into the casing, place the face screen cover back on.

9. Screw in the four corner screws. After completion of this step, your phone should function properly. Enjoy!