Back Panel

ID: 72557

Description: This guide will help you take apart your Garmin...

Steps:

1. Using a Torx T6 Screwdriver, remove the ten 7mm screws from the back panel.

2. Using a metal spudger, pry the device apart.
3. To recombine them, line up the two halves of the device and press them together.

4. Turn the device over, laying it on its back with the screen facing upwards.
5. Lift the front panel away from the silver part of the back panel.
6. Make sure not to rip the ribbon cable that is connected to the screen and the motherboard.