Astro Mixamp Control Button Replacement

ID: 72566

Description: Use this guide to remove control buttons for...

Steps:

1. Grip the dial tightly and pull straight off the device.
2. Repeat for the second dial

3. Using tweezers, remove the spacer nuts and washers from each dial post.

4. Before opening your device, ensure the device is not on or connected to the charging cable.
5. Insert a plastic opening tool into the seam between the rubber foot and plastic casing.
6. Pull the rubber foot free of the plastic casing.

7. Use a screwdriver to remove the screw from the rear casing.

8. Gently lift the rear casing from the device.

9. Remove the four screws that hold the motherboard in place.
10. Only touch the edges of the motherboard. Touching the surface can damage the motherboard.

11. Gently pull the motherboard from the front cover.

12. Gently insert a metal spudger under a control button housing.
13. Do not pry the button housing from the front panel, this can cause damage to the button.
14. Rotate the control button around the marked pin.