Base Replacement

ID: 72621

Description: Prerequisite Only

Steps:

  1. Turn the base over. You will see four 11mm Phillips #0 screws, one in each corner.
  2. Use a screwdriver to remove all four 11mm Phillips #0 screws.
    3. Step image
  3. Locate an easy seam for entry and insert the metal spudger to separate the plastic. Use the spudger in multiple places if necessary.
  4. Opening the base may require exerting significant force as it is bound together tightly. This step can be dangerous.
  5. The spudger is designed to make this step easier.
    6. Step image Step image
Back