Digital2 D2-861G Battery Replacement

ID: 72629

Description: This guide will be showing you how to replace t...

Steps:

  1. Working on your device while powered on may result in electric shock. Make sure to unplug and power down your device before you begin.
  2. Place your device on a soft cloth to avoid scratching the screen.
  3. Flip your device over so back panel is facing upwards
    4. Step image
  4. Do not use a lot of force as it can break the clips or the back panel.
  5. Insert spudger in the slot below the micro SD card
  6. You should hear clips releasing as you pry along the edges.
  7. With the spudger tool, run along the edges of the backing undoing 20 plastic clips.
    8. Step image Step image
  8. Look at the images to locate the black tabs.
  9. Carefully remove the tape to avoid damaging the device.
  10. Remove ALL the yellow tape securing the gold colored ZIF (Zero insertion force) connector and the battery. Discard or save the tape if you would like.
  11. To unclip the connector. Go under the black tab with a spudger or finger nail and simply lift up.
    12. Step image Step image Step image
  12. Make sure to not bend or puncture the battery when removing it.
  13. Locate the bundled cable connector and disconnect it by simply pulling it gently with your hands or using a spudger.
  14. Use prying tools to carefully break the adhesive under the battery
    15. Step image Step image
Back