HP Pavilion dv6-6180us Motherboard Replacement

ID: 72635

Description: If you are having complications with laptop...

Steps:

  1. Turn off and unplug the device before starting.
  2. Flip your device over so the bottom panel is facing up.
  3. Step image
  4. Slide the lock switch to the right.
  5. The panel will pop open at the top corner.
  6. Step image
  7. Use the plastic opening tool to remove the back panel.
  8. Some force may be required to remove the panel from the case. Use caution when prying to avoid breaking the panel or the plastic tabs securing it in place.
  9. Step image
  10. Use the PH 1 screwdriver to remove the four 3.5 mm screws securing the hard drive.
  11. Step image
  12. Lift the corner bracket to remove the hard drive.
  13. Step image
  14. Unplug the hard drive wire to detach the hard drive.
  15. Step image
  16. Remove a 3.5 mm screw that is securing DVD player with screwdriver PH1.
  17. Step image Step image
  18. Slide DVD player to the left and pull to remove completely.
  19. Step image
  20. Unscrew four 3.5 mm screws from the inside of the battery compartment with PH 1 screwdriver.
  21. Unscrew nine 5 mm screws with PH 1 screwdriver.
  22. Unscrew four 4 mm screws with PH 1 screwdriver.
  23. Step image
  24. Flip side up and open laptop.
  25. Pry open the keyboard using a plastic opening tool starting from the top.
  26. Lift up keyboard gently because a silver ribbon is still attaching it to the laptop.
  27. Step image Step image
  28. Place keyboard upside down.
  29. Lift up plastic cover over keyboard connector cable.
  30. Pull ribbon cable up away from keyboard to completely remove.
  31. Step image Step image Step image
  32. Remove seven 4mm pannel screws with PH 1 screwdriver.
  33. Step image
  34. Place the computer on its side
  35. Separate top panel from bottom frame.
  36. Step image
  37. Pop open rest palm assembly.
  38. Step image Step image
  39. Pull ribbon to detach from bottom panel.
  40. Step image
  41. Remove two 5mm screws securing fan, using PH1 screwdriver.
  42. Step image
  43. Flip laptop over.
  44. Remove two 4mm screws securing antenna using PH 1 screwdriver.
  45. Pull antenna to the right to remove.
  46. Step image
  47. Flip laptop side up.
  48. Pull off yellow insulating tape.
  49. Step image
  50. Grab tab on left top corner and remove black wire.
  51. Remove white input attachment.
  52. Step image Step image
  53. Hold the motherboard and pull to the right.
  54. The plugs on the left may be difficult to snap out.
  55. Step image
  56. Remove entire motherboard.
  57. Step image
Back