Steelseries Rival 700 Gaming Mouse Nameplate Replacement

ID: 72694

Description: The "RIVAL" back side nameplate can be replaced...

Steps:

1. To avoid electronically damaging either your computer or your mouse, unplug the usb cable from its socket.

2. The Rival 700 mouse is a non wireless mouse. The micro-USB cable end is an elbow socket, secured by a plastic clip.
3. To disconnect the cable from the mouse, firmly press the plastic clip using your thumb

4. The original nameplate is a soft rubber one that can be removed just by pulling it softly out of its socket.
5. WARNING: When reassembling, if you're using a custom nameplate that may not be as stretchable as the original one, insert it softly, and use a lime tool on the new part to avoid damaging the mouse socket.

6. You will be able to download the 3D files to design a custom nameplate on the Steelseries website. The link is also provided in the part description.
7. On this picture, the original "RIVAL" nameplate will be replaced with a new one on which i just had my Twitch ID printed.
8. Be creative, use colored plastic, put logos and drawings on your mouse.