LG G Pad 7.0 LTE Motherboard Replacement

ID: 72825

Description:

Steps:

  1. Power off your device before beginning the battery replacement (hold the button with the red marker until the device prompts you to power it off, then tap "Power Off").
  2. Be wary of the front screen and SIM Card while tearing down the device.
    3. Step image
  3. Put on an Anti-Static Wrist Strap to prevent damage to sensitive electrical components (optional).
  4. To separate the frame from the cover, pry between the screen and the cover using a plastic prying tool.
  5. Begin at the top left of the device to avoid damaging the motherboard and work your way around the perimeter of the screen.
  6. When you pry your device open, be wary of the volume rockers, motherboard, and camera. These components are delicate and can be sensitive to static electricity.
    7. Step image
  7. Disconnect the battery connector by prying it upwards (red marker).
  8. Be careful not to damage it while doing so.
  9. Remove the ribbon cables by prying them upwards with a plastic pry tool ).
  10. Do not bend the cable or connector as they are fragile.
    11. Step image
  11. There is a light adhesive holding the camera in the device.
  12. Using tweezers or a small plastic pry tool gently pull or pry the camera out of the device.
    13. Step image
  13. Pry the audio jack from the device using a spudger.
    14. Step image
  14. Remove the 7 Black 3mm PH0 screws from the motherboard (red markers).
    15. Step image
  15. Remove the Motherboard.
    16. Step image
Back