Breville Mini Smart Oven Main Fuse Replacement

ID: 72895

Description: Replace the main fuse.

Steps:

  1. Remove the two rear brackets, with two screws each.
  2. Remove the front right bracket. One screw holds the rubber pad, and two other screws are located underneath it.
  3. Remove all the small screws located behind the device.
  4. Remove the rear panel.
  5. The wiring and the control module are located on the right.
  6. Remove the three screws securing the side of the device completely to the left of the control module, when viewed from the rear. One screw is at the bottom, one in the middle, and another at the top. A very long screwdriver (30 cm) is required to reach them.
  7. You can now open the right side of the device by prying a little.
  8. The main fuse is located in the power cable under a white sheath attached to the frame. Bend the tabs holding the cable and slide the sheath to expose the fuse. Use a multimeter to confirm that there is voltage on only one side of the fuse.
Back