HTC Desire 626S Teardown

ID: 72944

Description:

Steps:

  1. The tools you need are something to pry the frame open and two screw drivers one philip and one security torx
  2. Start with opening the back of the phone
  3. Then unscrew the 7 screws that are around the frame of the phone and don't forget the one screw thats in the middle
  4. Pry frame open with these tools and don't force it or you may snap your frame
  5. Then your going to take the battery outbid gently pulling upward on the wires that is connected to the white piece of plastic
  6. then you going to take the the strip on the left hand side of the phone and pull it out with you fingers
  7. then you take out the strip that is on the right side of the strip u just took out. (Use fingers)
  8. Then you then you pick up the top phone chip and go to the bottom of it to take out the black strip which is the last one.
  9. then take the bottom rectangle chip and take it out with the top square chip keep the black wire on the chips cause its hard to put back on
  10. Then take out the top speaker
  11. take out bottom speaker
  12. When your finished the phone should look like this
  13. <<<<<
Back