Sony Vaio SVE111B11L Screen Replacement
ID: 72965
Description: This guide shows how to remove the screen of a...
Steps:
- Remove the charging adaptor. Some charge may still be in the battery or computer. DO NOT touch connectors or copper yellow connector.
- Locate the battery on the bottom of the computer.
- Flip the computer so that the battery faces you.
- Locate the two latches with the words “lock” and “release” on them.
- Push the latches towards each other and lift the battery to remove it.
- Remove the memory door on the bottom of the computer to access the screw for the keyboard.
- The screws for the memory door do not come out.
- Remove the 6.7 mm screw that holds the keyboard assembly in place.
- Be careful not to break the keyboard wire connection.
- Slide the wires out, away from the solder connections.
- Flip the computer over and open it.
- Gently pry the keyboard assembly from the screen side, using an opening tool. You will need to lift the keyboard about two inches.
- Using an opening tool, gently pull out and slightly up on the connector clip.
- Gently lift the keyboard assembly up and out.
- Remove charging adaptor. Some charge may still be in the battery or computer.
- DO NOT touch connectors or copper yellow connector.
- Take the covers on the bottom of the laptop off.
- Locate and remove the screws holding the motherboard down.
- Screws: L 4.6mm X D 1.85mm
- Locate the wires and connectors and remove them from the motherboard.
- Lift the mother board out and safely put it to the side.
- Remove charging adaptor and battery. Some charge may still be in the battery or computer.
- DO NOT touch connectors or copper yellow connector.
- Locate screws. L 3.35mm X D 1.8mm
- Remove Screws.
- Lay the screen on a hard flat surface.
- Remove hinges and wires for ease of removal.
- Gently remove the screen cover.
- Be careful of the camera at the top of the screen.
- Be careful of the seal tape between the cover and the screen.
- Locate the wires and connectors.
- Unplug the wires from the connectors.
- Be careful of the yellow tape around the connection.
- Gently lift the screen assembly up and out.