VTechCS6719-16 Button Replacement

ID: 74704

Description: This guide demonstrates a walk-through of steps...

Steps:

  1. Remove the sliding back cover from case.
    2. Step image
  2. lift the battery and unplug the two pin cable from phone base.
    3. Step image
  3. Remove the two 10mm screws at the base of the phone .
    4. Step image
  4. Use the spudger along the edge using a firm but gentle lifting motion.
  5. When doing this feel for the hooks that latch the phones front and back cases.
    6. Step image
  6. Unscrew a second set of 10mm screws to obtain access to the other side.
    7. Step image
  7. The front of the phone can now be placed to the side
  8. You will notice the button covers, these display the numerical values and positions of each button
  9. These can be placed aside as they will get in the way later.
    10. Step image
  10. Now the silicon pads for the phone buttons are exposed.
  11. These can easily be removed by pulling away the pads from the circuit board.
  12. To replace simply align the new pad onto the button positions.
    13. Step image
Back