ASUS ZenPad S 8.0 Front Facing Camera Replacement

ID: 74724

Description: If your front facing camera does not work, you...

Steps:

  1. if present, remove the MicroSD card before disassembly. Failure to remove could lead to damage to the MicroSD card , rear cover, or MicroSD card slot.
  2. Use the plastic tool to pry between the silver bezel and the back case
  3. Work the tool around the device to free the back case
    4. Step image Step image Step image
  4. Remove the ribbon cables by lifting up the white retaining flap on the ZIF connectors, then pulling the ribbon cable away.
  5. Do not kink the ribbon cables as they can break easily
    6. Step image Step image
  6. Remove the battery connector by prying it up away from the device using 2 plastic pry tools
    7. Step image Step image Step image
  7. Remove all 9 of the 1.5mm #00 Philips screws
  8. Gently lift the battery out of the device
  9. Use an opening pick or similar tool to separate the adhesive on the bottom and top of the battery.
    10. Step image Step image
  10. Use a plastic opening tool to lift the black retaining flap on the ZIF Connector
    11. Step image Step image Step image
  11. Use a tweezers to lift out the camera
  12. If you lifted the latch for the ribbon cable then it should come out with little resistance.
    13. Step image
Back