HP Compaq 2510p Bluetooth Adapter Replacement

ID: 75035

Description: This guide will show step-by-step instructions...

Steps:

  1. Place the laptop upside down, with the battery facing away from you. Towards the bottom-middle of the laptop, you should see a small panel with a Bluetooth symbol.
    2. Step image
  2. There is 1 screw on the panel you located in step one. Use your Philips head screwdriver to remove the single screw.
    3. Step image
  3. Remove the Bluetooth panel by pulling it with your finger.
  4. Pull gently as there is a wire connecting the laptop and the adapter.
    5. Step image
  5. Pull the adapter to the left exposing its underside. Locate and remove its only screw using your Phillip's head screwdriver.
    6. Step image
  6. Separate the Bluetooth adapter by pulling it from its casing.
    7. Step image
  7. Remove the adapter by pulling on the base of the connecting wires and the adapter, in opposite directions.
  8. Use moderate force.
    9. Step image
Back