Panasonic HC‑VX870 Shoe Adapter Replacement

ID: 78667

Description: Removing several sides of the camcorder and...

Steps:

1. Unscrew the J1 screws on the left side of the camcorder.
2. Unscrew the marked screws on the bottom of the camcorder.
3. Unscrew the marked screws on the back of the camcorder.

4. Pull off the left side of the camcorder. You may have to use a little force but don't worry about breaking anything in the camcorder.

5. Unscrew the indicated screw on the right side of the camcorder.
6. Unscrew the indicated screw on the back of the camcorder.

7. Unscrew indicated screw on the inside of the left side of the camcorder.

8. Remove the top cover of the camcorder by lightly lifting up on the back end of the top and tugging away from the lens (don't be afraid to use force).

9. Unscrew the indicated screws and remove the piece they hold in place.
10. Unscrew the indicated screws and remove the piece they hold in place.

11. Remove the shoe adapter by simply pulling it out of its place.
12. Be sure not to loose the tiny spring that is attached to the shoe adapter as you are removing it.