Asus X751L Screen Replacement
ID: 78738
Description: This guide will walk you through the process of...
Steps:
- With the screen closed, place your laptop upside-down with the front facing you.
- Remove the six 14.6mm Phillips #00 screws.
- Remove the four 6.6mm Phillips #00 screws.
- Flip the laptop over and open the lid.
- Pry around the edges of the laptop base using the plastic opening tool.
- Prying too hard can break the plastic clips.
- Carefully lift the keyboard up.
- Be very careful when lifting the keyboard up. Two zero insertion force (ZIF) cables are between the keyboard assembly and the motherboard. Do not lift the assembly too high.
- Disconnect the two ZIF connectors from the motherboard using your fingernail to lift the cream-colored tab.
- Remove the two rubber screw covers and the Phillips #00 screws beneath them.
- Pry around the edges of the panel using the plastic opening tool.
- Prying too hard can break the plastic clips.
- Carefully pull off the screen cover.
- Remove the two 4.7mm Phillips#00 screws to free the screen-holding bracket from the back panel.
- Remove the four 3.6mm Phillips#00 screws on the right side of the screen.
- Remove the four 3.6mm Phillips#00 screws on the left side of the screen.
- Make sure you hold the screen so it doesn't fall forward when removed from the bracket.
- Gently lay the screen down to reveal the back side.
- Remove the tape over top of the display cable connector.
- Disconnect the display cable connector using your fingers.