Princess Compact Blender Rubber Gasket Replacement

ID: 78987

Description: By wear and tear the rubber ring underneath the...

Steps:

1. Lift the glass container of the motor
2. The motor is the bottom part of the blender
3. If your blender has recently been used, you may want to clean it before taking it apart

4. Unscrew the base from the glass container. The right direction is indicated by the red arrow.
5. The base is the part whereon the blades are attached

6. Lift metal blades with the metal hood out of the base
7. Watch out for sharp blades or wear gloves
8. Large rubber ring may fall out of the base, this is no problem, just put it back in place

9. Take the cutting blades in one hand and the black, plastic connector part in the other
10. This is where you could use the gloves
11. Unscrew the latter together with the screw-nut from the axis by twisting
12. If necessary, apply a little force to slightly pull it out
13. To unscrew, you have to twist right. The “righty tighty, lefty loosy-principle” does not apply here

14. Gently slide off the hood and lower, small metal protective ring from the axis and don’t lose the rubber ring!

15. Slide the broken ring off the axis
16. Replace the broken ring for a new one

17. Slide the remaining parts back on the axis in the following order:
18. Metal hood
19. Small metal protective ring
20. Black plastic connector
21. Screw back the screw-nut on the thread with the pliers to fasten the assembly
22. Put the blade-assembly back in the base

23. Twist the base back onto the glass container
24. Put the glass container on the stand (bottom part of the blender, containing the motor)
25. Start making your smoothie!