Braven BRV-1s Speaker Cone Replacement

ID: 80150

Description: If your speaker sound is muffled or broken, the...

Steps:

1. To remove the outer case, remove 4 phillips screws (Phillips #00 headtype, 9.3mm long)

2. Using a metal spudger, gently pry the side of the defective case.

3. Still using the metal spudger, continue to work your way around the outer case.

4. Remove the broken outer case. Replace with used/new out case.
5. Note that unless properly sealed with glue, the speaker will no longer be water resistant.

6. To remove the speaker cone plate, remove 10 phillips screws (Phillips #00 headtype, 9.3mm long)

7. Using a metal spudger, gently pry the side of the defective speaker cone plate.
8. Remember to pry all around the side of the speaker cone plate.
9. Keep in mind that the adhesive will make it difficult to pry the plate off. To loosen the adhesive, heat the plate with a device such as a hair dryer.

10. Remove the broken speaker cone plate. Replace with used/new out plate.