Chumby One Chassis Removal

ID: 87476

Description: Prerequisite Guide Only

Steps:

1. Remove 4 self-adhesive plastic dots covering the screw holes.

2. Remove the four 2mm screws with a Phillips screwdriver.

3. Remove the back and bottom cover.

4. Disconnect the battery connector from the motherboard with a plastic opening tool.

5. Disconnect the microphone connector from the motherboard with a plastic opening tool.

6. Remove the display ribbon cable from its socket with a plastic opening tool.

7. Remove the volume knob from the side of the Chumby One with a plastic opening tool.

8. Remove the four 6mm screws using a PH000 bit on the inner chassis.

9. Remove the inner components from the outer shell.