Nikon Coolpix S7000 Shutter Button Replacement

ID: 87594

Description: If you notice the camera shutter button isn't...

Steps:

1. Remove the outer frame of the camera by unscrewing the screws around its sides with a JIS J000 screwdriver.
2. Screw locations.

3. Remove outer camera frames by carefully pulling the frame apart from the body of the camera.

4. Once the shutter button assembly is removed from the camera shell, carefully remove the black tape on the underside of the metal plate.
5. Black tape.
6. Do not discard the tape as you will reapply it when putting the shutter assembly back together.

7. Unscrew the two screws on each side of the metal plate to remove the plate and springs underneath it.
8. Push the button through the assembly to release it and then carefully remove the button cover to reveal the coiled spring and bottom cover.
9. Locations of the two screws.
10. Be very careful not to lose the two metal plate springs and the coiled spring when disassembling. A slow and steady hand will help prevent the springs from ejecting.