iHome iBT16 Base Plate Replacement

ID: 87905

Description: In this guide, the reader will be stepped...

Steps:

  1. Make sure to flip the device over to get into the correct orientation
  2. Using the Philips #00 Screwdriver, unscrew and remove the four 9mm black screws on the base plate of the device.
  3. Make sure to keep these screws in a safe location so you don't lose them
    4. Step image Step image
  4. Using the plastic opening tool, insert into the crack between the base plate and the main body of the device
  5. Using a lever like motion, push the opening tool down thus lifting the plate
  6. You will need to use your fingers to lift the base plate off the main body of the device
  7. The motherboard is directly underneath the base plate
    8. Step image Step image
Back