Unbranded UB-15MS10 Screen Replacement

ID: 87928

Description:

Steps:

1. Use an opening tool to pry off the lid of the memory card compartment.

2. Use a Phillips #00 Screwdriver to unscrew the two 1.2mm screws within the compartment. This allows the device to be opened.

3. Insert opening tools to partially pry open the cover.

4. With the cover being partially held open, slide a spudger around the seam to pry off the cover.

5. Remove the tape that is holding the battery in place.

6. Unscrew the five 1.2mm screws that connect the circuit board to the device.

7. There are three silver tabs around the internal components that connect it to the frame with screws. Unscrew these screws to remove the internal components.

8. Carefully lift the internal components from the screen and place them into a replacement screen.