How to fix gaps between infill and the outer wall on a ProtoCentre 999

ID: 95120

Description:

Steps:

  1. Go to kisslicer
  2. go to style
  3. Adjust the infill density
  4. Adjust Infill extrusion width and Infill style
  5. Open kisslicer
  6. Increase the skin thickness
  7. skin thickness=Extrusion width *no of loops
  8. Go to control in machine menu
  9. Click Temperature
  10. Go to nozzle 1 and and increase the temperature by 5 degree
  11. Go to main menu
  12. If you Rotate the knob in anti clock wise direction, the speed will be decreasing.
  13. Decrease the speed by 20%
Back