3rd party DualShock 2 Wireless Controller Analog Stick Replacement

ID: 95784

Description: Often, through expected usage, an analog stick...

Steps:

1. Remove the six 7.8 mm anchoring screws from the back casing of the controller using a Phillips #0 screwdriver.

2. Pull apart the outer casing by hand, or by using a plastic opening tool, from the bottom of the controller.
3. Be mindful not to sever the connection between the battery pack attached to the back casing and the internal board

4. Remove the two 6.1 mm screws holding the internal analog stick board and the front of the controller together.

5. Lift the analog stick board away from the front of the controller.
6. Remove the detached or loose analog stick for realignment.

7. Realign the analog stick by pushing the removed stick back into its chassis with focus on pushing it in at the new, desired resting angle. You should feel or hear a small click if done correctly.
8. The stick may not immediately click into place under the pressure. Instead of pushing harder, try rotating the stick 90 degrees and pushing down again.