Hoverboard Bluetooth Remote Control Replacement

ID: 96120

Description: Use this guide to replace the Bluetooth remote...

Steps:

1. Remove the 10 screws with a Phillips screwdriver to access the inside of the hoverboard.
2. The electronic circuit boards are mirrored on both sides, so examine them both to determine which has the Bluetooth setup.

3. Unhook the lighting and indicator light wires to remove the cover.

4. Remove the 4 screws that hold the circuit board support.

5. Remove the 4 screws that secure the board to the support.

6. Remember the sequence of wires to be soldered on the Bluetooth board.

7. Use a soldering iron to affix the 4 pins of the Bluetooth board onto the hoverboard board
8. Before soldering the boards, check the functionality of the Bluetooth board by merely inserting the pins, which is enough.