HP Pavilion 15-bk020wm Hard Drive Replacement

ID: 96192

Description: Your stock hard drive could be too slow for...

Steps:

  1. Before you begin, turn the laptop off and unplug it from the power source.
  2. Remove the 4 computer feet. (Our device didn't have these; they can be taken off with a plastic spudger.)
  3. Remove the two screw cover strips.
  4. Remove the two screw cover plugs.
  5. Unscrew all 12 screws (size: Phillips M2.5×7.0 ) from the bottom of the computer.
    6. Step image Step image
  6. Turn the computer over to the front.
  7. Open the laptop.
  8. Use a plastic pry tool to pry up the keyboard cover near the hinge on both the right and left side, and work your way towards the touchpad.
    9. Step image Step image Step image
  9. Tilt the keyboard cover up slightly.
  10. Do not fully remove the keyboard, as it is still attached to the laptop by some cables.
    11. Step image
  11. Remove the hard drive from the laptop.
  12. Our device did not contain a hard drive.
    13. Step image
Back