Nostalgia GCM200 Power Cable Replacement

ID: 96370

Description: This is a replacement guide that teaches you...

Steps:

1. Remove the two 1.3 mm Phillips #2 screws.
2. Remove the S6 spanner screw.
3. Carefully place these three screws somewhere safe to use later in reassembly.

4. Split the device in half to expose the internal parts of the device.
5. Again, there are two more Phillips screws to remove.

6. Remove the two screws from both sides of the heating coil.

7. Remove (flexible) plastic sleeves from the inside end of the power cable.
8. You might want to use force, pull out while shaking it.