LG Volt Charger Port Replacement

ID: 98910

Description: The charging port of any device is a vital...

Steps:

1. Pry back cover with finger in the crease.
2. Remove back casing.

3. With your finger, pry the battery out through the crease made for removal.

4. Remove all 11 (4mm) screws with the JIS #000 screwdriver
5. There are three screws on top, three above the battery, one next to the battery, one under the battery and three at the bottom of the phone.

6. Use the plastic opening tool to remove the back housing from the frame of the phone.

7. Lift copper tab located on the right side of the device.

8. Use a JIS #000 screwdriver to remove the 1 screw (4mm) on right side under copper tab.
9. Use a JIS #000 screwdriver to remove the screw (4mm) on bottom left under battery tray.

10. Disconnect the white and black cables as indicated.
11. Lift indicated flap as shown.

12. Use the plastic opening tool to carefully lift the charger assembly from the phone.
13. Start from the copper tab and continue in a clockwise direction.
14. Once it is loose remove the assembly from the phone.

15. Put a new charging port in place of old charging port.
16. Follow steps 8 through 1 in that order for reassembly.