DeLonghi ESAM 3000.B Magnifica disassembling

ID: 98952

Description: Most repairs require the Magnifica to be...

Steps:

1. Pull the plug!
2. Remove the drip tray, the water tank and the pulp container.

3. The rear panel and side panels are attached with six phillips screws #2. Screw them out.

4. Slide the right side panel about 2 cm to the back.
5. Then solve it.

6. The left side is a bit stuck. Place a plastic opening tool in the gap between the front and left side panel above the opening for the water tank. Lift the gap slightly larger.
7. Then place the tool in the gap between the front and left side panel under the opening for the water tank. Increase the gap and push the side part about 2 cm to the rear.
8. Lift out the left side piece.

9. Take out the rear panel.

10. The front panel is secured with four PH2 Phillips screws, two left and one right each. Turn it out.
11. Use a plastic opening tool to lever off the steam tap.
12. Carefully pull the front panel about 1 cm forward so that there is a gap between the top cover and the front panel,
13. Do not pull the front panel too far, it is still attached with different hoses and cables.

14. Two Phillips screws PH2 hold the lid at the back. Turn it out.
15. Lift the lid upwards.