Garmin Nuvi 56LMT Display Screen Replacement

ID: 98967

Description: This guide will show you how to replace the...

Steps:

  1. Power down the device before proceeding.
  2. Locate the four 11.0 mm Torx screws and remove them with the T5 Torx screwdriver.
    3. Step image
  3. Find the crevice where the front and back of the device meet.
    4. Step image
  4. Run the plastic opening tool around the border of the device until it can be easily pried open by hand.
  5. Be careful to not damage the ribbon cable by completely pulling the back from the front.
    6. Step image
  6. Carefully use the spudger to flip open the ZIF connector.
    7. Step image
  7. With your fingers hold back each of the clips located around the border of the screens back.
  8. Pull screen up and slide out in the opposite direction of the ribbon to avoid snapping the fixed clips.
    9. Step image Step image
Back