Samsung Gear VR Focus Wheel Replacement

ID: 99019

Description: The Samsung Gear VR focuses on the connected...

Steps:

1. Remove the front cover to access a plate that holds the phone in place during use.
2. Remove the four corner screw covers with a metal spudger to reveal four screws.
3. Remove the sticker located at the top center to reveal two additional screws.

4. Using the PH000 tip remove the six 0.5 cm screws that secure the front phone mount.
5. After the six 0.5 cm screws are completely removed lift the front phone mount up and to the left.
6. When handling your equipment be careful not to strain the wire harness located on the left side of the headset.

7. Use the blue plastic opening tool to remove the rest of the the pop connectors from the motherboard.
8. The larger gold connector is lightly glued down so it may take more effort to remove than the others.

9. You can now remove the motherboard from the mask.
10. Make sure that nothing is connected to the motherboard before you try to remove it as pulling it with something connect might brake the connections.

11. Using the PH000 tip remove the eight 0.5 cm screws from the Inner Mask
12. Carefully remove the Inner Mask by pulling it from the inner side of the lenses socket.

13. Use your fingers to gently remove focus wheel.