M3D Micro Z Axis Belt Replacement

ID: 99162

Description: This guide will show how to open the device and...

Steps:

1. Removing the frame is necessary to access the z axis belt, motors and ports. Make sure the unit is unplugged and set on a hard level surface.

2. Pull the x-rods away from the plastic sliders on the y-rods, and flip the slider upwards to release the tracks. Lift the extruder assembly out of the way.

3. No tools are required to remove the frame. Press down on the printing bed with your thumbs while lifting the frame with your fingers. The frame easily slides up.

4. Remove the z axis belt from the device by simply lifting each corner of the belt off the corner gears and slide up over the z axis bars.