Alienware 17 R4 Wi-Fi Card Replacement

ID: 99163

Description: This guide will teach you how to remove the...

Steps:

1. Use a PH1 screwdriver bit to remove the six M2.5x13 screws (2.4 mm) on the back of the laptop.
2. Use a PH1 screwdriver bit to loosen the one M2x3 screw (1.9 mm).
3. The M2x3 screw (1.9 mm) does not come out completely.

4. Pull the base cover up to remove it.
5. If you are having trouble, insert a plastic opening tool into the divots along the laptop's edges to loosen.
6. Removing the cover may require some force.

7. Locate the WI-FI card.

8. Peel back plastic cover of wi-fi card.
9. Use a PH1 screwdriver bit and remove the one M2x3 screw (1.9 mm)

10. Gently undo the clips attached to the wi-fi card.
11. If the clip is not gently removed it is possible that the entire base will be torn off the wi-fi card. You will need to purchase a new wi-fi card if this occurs.

12. Locate the cables that connect the wi-fi card.
13. Gently pull upwards to remove cables and slide the wi-fi card out from its slot.